External Hard Disk

Apple Studio Display "Mac mini" HolderThis mount can hold a Mac mini (2011-2023) safely and firmly on the back of your Apple Studio Display. Very easy to attach, the holder just slips on the back of the stand. Fits firmly. The holder contains several vent holes in the bottom for necessary air flow.Suitable for the following Mac mini models:- Mac mini (M2, 2023)- Mac mini (M1, 2020)- Mac mini (2018)- Mac mini (Late 2014)- Mac mini Server (Late 2012)- Mac mini (Late 2012)- Mac mini (Mid 2011)- Mac mini Server (Mid 2011)If you don't know the exact model of your Mac mini, go to the Apple dropdown menu of your Mac mini, then select "About This Mac". Material: PLA+ 3D printed (sturdy)Color: Aluminum Look or Black*** Fits on the standard tilt-adjustable stand, and the the tilt- and height-adjustable stand. Please select correct type during order process ****** Apple Studio Display and Mac mini not included! *** Learn more about this item

Apple Studio Display Single Slot Hard Disk Mount (Black)This mount holds 1 external hard drive (or 2 depending on the size) on the back of your Apple Studio Display. Can only be used with the standard tilt-adjustable stand!Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, or vertically if the size of the drive permits. The hook of the mount is snapped into place onto the holder. Each slot is 149mm wide.Material: PLA 3D printed (sturdy)Color: BlackYou can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). The width of the compartment is 149mm. If requested the exact same mount with other measurements can be ordered (please leave a message first before ordering).*** Fits on the standard tilt-adjustable stand, and the the tilt- and height-adjustable stand. Please select correct type during order process ****** Apple Studio Display not included! *** Learn more about this item

Single Hard Disk Mount for the 24" iMac (Black)This mount holds 1 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: BlackYou can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). The width of the compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac 24 inch not included! *** Learn more about this item

Dual Hard Disk Mount for the new 2021 24" iMac (Blue Transparant)This mount holds up to 2 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: Blue (transparant)You can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). There are two compartments each with the same size. The width of each compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac 24 inch not included! *** Learn more about this item

Apple Studio Display "MacBook" Holder for tilt-adjustable standThis mount can hold a MacBook, MacBook Pro or MacBook Air on the back of your Apple Studio Display. Very easy to attach, the holder just slips on the back of the stand. Fits firmly. The holder contains several vent holes in the bottom for necessary air flow.When ordering please select in the dropdown menu the MacBook model you would like to use the holder with. I will then calculate the necessary dimensions of the slot size. That way your MacBook slips snugly and secure in the holder. If your MacBook is not listed in the dropdown menu of this listing please leave a message with your MacBook model. If you don't know the exact model of your MacBook, go to the Apple dropdown menu of your MacBook, then select "About This Mac". If you are using a case around your MacBook, please contact me first so we can calculate the dimensions needed for your holder.Material: PLA+ 3D printed (sturdy)Color: Aluminum Look or BlackIf you would like to put other kinds of laptops, hard drives or other devices in this holder, before you place your order please leave a message with the dimensions of your device.*** Fits only on the standard tilt-adjustable stand NOT on the tilt- and height-adjustable stand!!! ******* For use with tilt- and height-adjustable stand please see other listings in my Etsy shop ******* Apple Studio Display and MacBook not included! *** Learn more about this item

Inspired by DouSoft and very practical protective cover to transport your hard drive without risk! This case is padded and will accommodate a large majority of hard drives.A pocket on the front will allow you to store the hard drive cables.It measures approximately 15.5cm in height and 11.5cm in width. The closure is velcro.All the models that I offer you are unique with very different fabric combinations, all you have to do is make your choice! If a combination no longer exists or if you want to make one to your liking, do not hesitate to contact me.The coffee bean is laser engraved on a square cowhide leather label 2.5cm square and 1.2mm thick hand-sewn on the front of the pocket. Grain Dou Café is also engraved on a small rectangle of beech wood hanging from a loop on the side of the cover. Learn more about this item

Dual Hard Disk Mount for the 24" iMac (Black)This mount holds up to 2 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: BlackYou can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). There are two compartments each with the same size. The width of each compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac 24 inch not included! *** Learn more about this item

Single Hard Disk Mount for the 24" iMac (Aluminum Look)This mount holds 1 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: AluminumYou can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). The width of the compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac 24 inch not included! *** Learn more about this item

iMac Single Hard Disk MountThis mount holds 1 external hard disk on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The mount has an opening on the bottom for cable routing.Material: PLA 3D printed (sturdy)Color: black (or another color if requested)You can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). The width of the compartment is 85mm. If requested the exact same mount with other measurements can be ordered.Available for iMac 27 inch and 21.5 inch.**** NOW ALSO AVAILABLE for the 24 inch iMac - PLEASE READ BELOW ****I also offer a hard drive mount for the 24 inch iMac. The hard drive is put on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder. Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide. Learn more about this item

Cut vinyl decals for your Synology Diskstation D8 and D9 disk trays. These decals will fit the following models: - D8 Trays (DS918+, DS418, DS418play) - D9 Trays (DS1520+, DS1019+, DS920+, DS720+, DS420+)Covers entire front of the tray, leaving a hole for the key lock. Does not obstruct anything. Text is cut into vinyl film showing the black plastic of the disk tray. These are not printed.- - - -You have a choice of the number sequence starting at either "DISK_00", or at "DISK_01". It all depends which numbering method you prefer or adhere to.- - - -Decals are self-adhesive, and do need to be aligned precisely. No trimming required, if they are aligned correctly.One extra decal is included for use as a practice piece.- - - -If you'd like to customize the text, check out the other listing in my shop: https://www.etsy.com/ca/listing/842036620/synology-disk-tray-decals-customized- - - -PLEASE NOTE: These decals are sized to fit the flat-fronted D6 type of disk trays. These will not fit the newer D6 type with a LED at the top, and angled sides. The photos all show the decals applied to a DS418play.- - - -PLEASE NOTE: Due to COVID, Canada Post is not shipping mail to many international destinations. Check the Canada Post website, or message me and ask if I'll be able to send to your country. If you do order, and your country is on the list, your order will be cancelled and a full refund given.***U.S. CUSTOMERS: Items are sent as a tracked parcel from Canada. Please allow a minimum of 21 business days from time of purchase for your package to arrive. If you require the item sooner, shipping upgrades are available. Please message me for details.***CANADIAN CUSTOMERS: Items are sent out via regular Lettermail. Destinations within Alberta take a minimum of 5-10 business days from time of purchase, and can take a minimum of 7-10 business days outside of Alberta. If you require the item sooner, or would prefer a tracked shipment, please select the shipping upgrade option at checkout.*** INTERNATIONAL CUSTOMERS: Items are sent from Canada as regular Lettermail with no tracking. Please allow 3-4 weeks for your package to arrive. If you would prefer a tracked option, or faster delivery, please message me for more options to your destination.--------------------------------------------------------------------HAVE QUESTIONS or NEED MORE HELP?Please contact me through etsy message, it’s my pleasure to help! Learn more about this item