External Hard Disk
Vintage Apple HDI-20 External 1.4mb Floppy Disk Drive Untested
Vintage Apple HDI-20 External 1.4mb Floppy Disk Drive Untested. Look at our store, there's a lot of vintage electronics & computers available ! This one is in good overall shape & not tested, has a few minor scratches and it's Not tested thoroughly due to the fact that we are missing either the drivers or hardware to fully test. Buyers will have to do their own research in regard of the compatibility or software/hardware requirements for computer peripherials. Please see pictures for a better idea of what the item looks like. For better and faster service to our US customers, we ship twice a week from Champlain, New York. We also ship worldwide and for Canada we use Canada Post Expedited. Thank you for shopping with us !
Learn more about this item
Apple Studio Display Dual Slot Hard Disk Mount (Black)
Apple Studio Display Dual Slot Hard Disk Mount (Black)This mount holds 2 external hard drive (or more depending on the size) on the back of your Apple Studio Display. Can only be used with the standard tilt-adjustable stand!Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, or vertically if the size of the drive permits. The hook of the mount is snapped into place onto the holder. Each slot is 149mm wide.Material: PLA 3D printed (sturdy)Color: BlackYou can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). The width of the compartment is 149mm. If requested the exact same mount with other measurements can be ordered (please leave a message first before ordering).*** Fits on the standard tilt-adjustable stand, NOT the the tilt- and height-adjustable stand. ****** Apple Studio Display not included! ***
Learn more about this item
24" iMac (2021) Dual Hard Disk Mount (Purple Aluminum Look)
Dual Hard Disk Mount for the new 2021 24" iMac (Purple Aluminum Look)This mount holds up to 2 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: Purple (Aluminum Look)You can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). There are two compartments each with the same size. The width of each compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac 24 inch not included! ***
Learn more about this item
24" iMac Single Hard Disk Mount
Single Hard Disk Mount for the 24" iMac (Aluminum Look)This mount holds 1 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: Aluminum Look, Black, Transparent Blue, Purple.You can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). The width of the compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac and Hard Disk not included! ***
Learn more about this item
24" iMac Dual Hard Disk Mount
Dual Hard Disk Mount for the 24" iMac (Aluminum Look)This mount holds up to 2 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The hard drive is put in the slot on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder (the power lead is in the way). Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.Material: PLA 3D printed (sturdy)Color: Aluminum Look, Black, Transparant Blue, Purple.You can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). There are two compartments each with the same size. The width of each compartment is 127mm. If requested the exact same mount with other measurements can be ordered (please leave a message first).Also available for iMac 27 inch and 21.5 inch, please see other listing in my Etsy Shop.*** iMac and Hard Disk not included! ***
Learn more about this item
Leather Case for external HDD. Leather PDF pattern. Hard disk holder. Mini bag. Leather Crafting Template.
This Template will help you save time and allow you to enjoy the leather crafting process.An example of real products can be found in the listing description.This pouch suitable for external HDD with dimensions 11x80x115 mm. ((3 3/16"x4 17/32"x7/16") approximately and usb cable. You can also use it for item with same dimensions.Internal pouch dimensions - 18x122x85 mm. (3/4"x4 13/16"x3 3/8").What you get:Instant download digital ZIP archive with Pattern pdf file (A4 format, dimensions in mm. + Letter format, dimensions in inch).Material list for this project and short instruction are included with Pattern.Please NOTE: This is an INSTANT DOWNLOAD Digital Product. No physical item will be shipped.Please use "actual size" settings in your printer when print patterns, and check dimensions after print.Required Materials:I recommended using an natural veg tanned leather thickness 1.6 - 2.0 mm. (~4 to 5 oz) for getting result same as example photos of this Listing.However, possible using different types of leather with a finish coating or without.If you have any questions or comments please contact me. Please allow me some time for answer in reason of different time zones.I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order.
Learn more about this item
Iron Man MKV Small Briefcase For Power Bank & External Hard Disk (Can Open)
Please read before place the order The customer will be response the tax charged by yourself . The products damaged from shipping process are not in responsibility of shop . No refund or send back to repair .Customer must set address telephone number in case that the product returning back the cost of resending will be responsible by customer. The production time depends on the number of orders and employment (Duration making 15-30 days per piece)Delivery by DHL (Time about 5-7 days , Maybe Late 7-10 days)Delivery by Thailand Post (Time about 15-20 days , Maybe Late 20-30 days)If Customer want the other type of character please contact me directly in my FacebookIf Customer want to change color (the normal customer can’t adapt) , It may use the similar color due to different of mobile screen display. See many goods in YOUTUBE (But Price is not same as ETSY because of fee).!! Warning Scammer should not buy any items !!https://www.youtube.com/watch?v=ithS6tndkc4https://www.youtube.com/watch?v=cLsuF5oMWJc
Learn more about this item
Apple Studio Display "MacBook" Holder for tilt- and height-adjustable stand
Apple Studio Display "MacBook" Holder for tilt- and height-adjustable standThis mount can hold a MacBook, MacBook Pro or MacBook Air on the back of your Apple Studio Display. Very easy to attach, the holder just slips on the back of the stand. Fits firmly. The holder contains several vent holes in the bottom for necessary air flow.When ordering please select in the dropdown menu the MacBook model you would like to use the holder with. I will then calculate the necessary dimensions of the slot size. That way your MacBook slips snugly and secure in the holder. If your MacBook is not listed in the dropdown menu of this listing please leave a message with your MacBook model. If you don't know the exact model of your MacBook, go to the Apple dropdown menu of your MacBook, then select "About This Mac". If you are using a case around your MacBook, please contact me first so we can calculate the dimensions needed for your holder.Material: PLA+ 3D printed (sturdy)Color: Aluminum Look or BlackIf you would like to put other kinds of laptops, hard drives or other devices in this holder, before you place your order please leave a message with the dimensions of your device.*** Fits only on the tilt- and height-adjustable stand NOT on the tilt-adjustable stand!!! ******* For use with tilt-adjustable stand please see other listings in my Etsy shop ******* Apple Studio Display and MacBook not included! ***
Learn more about this item
iMac Dual Hard Disk Mount (Aluminum Look)
iMac Dual Hard Drive Mount (Aluminum Look)This mount holds up to 2 external hard drive on the back of your iMac. Very easy to attach, it just slips on the back of the stand. Fits firmly. The mount has openings on the bottom for cable routing.Material: PLA 3D printed (sturdy)Color: AluminumYou can choose between different compartment sizes: 11mm, 15mm or 22mm (thickness of the hard disk case). There are two compartments each with the same size. The width of each compartment is 85mm. If requested the exact same mount with other measurements can be ordered.Available for iMac 27 inch and 21.5 inch.**** NOW ALSO AVAILABLE for the 24 inch iMac - PLEASE READ BELOW ****I also offer a hard drive mount for the 24 inch iMac. The hard drive is put on its side, not vertically. This is because the height of the drive (longest side) doesn't allow it to be placed vertically in the holder. Maybe future larger iMac models will allow the hard drives to be stored vertically because their stands are probably taller. The hook of the mount is snapped into place onto the holder. Each slot is 127mm wide.
Learn more about this item
Apple Studio Display "Mac mini" Holder for tilt-adjustable stand
Apple Studio Display "Mac mini" Holder for tilt-adjustable standThis mount can hold a Mac mini (2011-2023) safely and firmly on the back of your Apple Studio Display. Very easy to attach, the holder just slips on the back of the stand. Fits firmly. The holder contains several vent holes in the bottom for necessary air flow.Suitable for the following Mac mini models:- Mac mini (M2, 2023)- Mac mini (M1, 2020)- Mac mini (2018)- Mac mini (Late 2014)- Mac mini Server (Late 2012)- Mac mini (Late 2012)- Mac mini (Mid 2011)- Mac mini Server (Mid 2011)If you don't know the exact model of your Mac mini, go to the Apple dropdown menu of your Mac mini, then select "About This Mac". Material: PLA+ 3D printed (sturdy)Color: Aluminum Look or Black*** Fits only on the standard tilt-adjustable stand NOT on the tilt- and height-adjustable stand!!! ******* For use with tilt- and height-adjustable stand please see other listings in my Etsy shop ******* Apple Studio Display and Mac mini not included! ***
Learn more about this item